Solution for any Samsung Dryer Error Code
- Licensed Technicians
- ODP Certified
- 24-hour telephone support
- 5 star reviews
Samsung Dryer Error Codes
9C1, 9E, 2E, 9E1
This error code comes when there is a problem with the dryer’s voltage supply. If you experience this problem, make sure that the dryer is running on its own power supply and not on an extension cord. If the dryer is electric, make sure that the power cord is connected properly and that the correct voltage is being applied. As power grids and the rules for using them differ from country to country, you may encounter this error if you purchase the model outside the country for which it was sold. If the error persists, contact a specialist Request Service
bE, bE2, bC2, 6E, 6E2, 6C2
This displays if a panel button is found to be stuck or is being pressed repeatedly. If you encounter this error, turn off the dryer’s power before manually pressing and releasing each button on the control panel while moving back and forth, touching each button’s edges. Request Service
dC, dE, dF, do, d0, 1 DC, 1 dF
These relate to the door, latch and sensors that determine whether the door is properly secured. This can happen if the door does not lock, does not close, or remains closed. Make sure that the door is closed and latched properly, that there is no laundry or other objects stuck in it, and that the latch is securely locked. Request Service
tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS
These show a problem with the sensors used to monitor the temperature. The most frequent reason is the dryer’s heat-trapping vent system or clogged lint screen. To fix the problem, clean the vent system, lint screen, or both. Request Service
HC, hE, HC4, 1 HC
This indicates that the dryer is overheating. The most common cause is a clogged ventilation system or lint screen in the dryer. To fix the problem, clean the ventilation system, the mesh filter or both. Sometimes the error can be caused by low voltage, which can occur when the heater is not hot enough (on electric dryers). Contact an electrician to check the supply voltage if the dryer is electric. Request Service
AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC
The dryer’s internal parts cannot interact. The dryer must be switched off for 60 seconds before switching it on again. Request Service
FC, FE, 1 FC
It indicates incorrect power supply frequency. Try restarting the cycle to resolve this problem. Request Service
WHY CHOOSE SUPERIOR APPLIANCE SERVICE
Over 400 positive reviews on Google Maps and HomeStars.
Repair on the same day or any other date convenient for you.
All work and parts guaranteed for your peace of mind.
Adequate prices. 9 out of 10 problems are solved after the first call. No overpayments.
Want to know if you need a handyman to solve your problem?
Leave your phone number and our dispatcher will call you back right away!
Thank you.
We will contact you. Shortly.