Frigidaire Dishwasher Error Code i30

How to fix Frigidaire dishwasher error code i30

The error code i30 on your Frigidaire dishwasher usually indicates a problem with the pump. When the dishwasher tank reaches its capacity, excess liquid is drained into the bottom tray. This action activates the float switch, an important component that detects the water level. For safety reasons, the dishwasher interrupts the wash cycle and displays the error code i30 on the control panel.

What are the reasons for the error code i30?

• Leakage. Start by inspecting the pan. If moisture is present, check for leaks by removing the top lid and side walls, and then run any program to find the source of the dripping water.
• Dirty leak detector. Inspect the foam float at the bottom of the pot that is triggered when the pot is full. Clean the sensor if it is stuck to the wall, causing a false overflow indication.
• Clogged drainage system. If accompanied by error codes iF0, i40 or i20, this indicates a problem with the drain. Check the drainage system, clean any dirty filters and check the hose for blockages or kinks.
• Defective inlet valve. In conjunction with drainage errors, check the inlet valve for debris buildup or faulty wiring. Measure the contact resistance with a multimeter and replace the valve if it is defective.

While it can be tempting to fix the problem yourself, seeking professional help from the experts ensures that the problem is resolved effectively. Contact Superior Appliance Service today and let our experienced technicians bring your Frigidaire dishwasher back to life!