Solution for any Maytag Dryer Error Code
- Licensed Technicians
- ODP Certified
- 24-hour telephone support
- 5 star reviews
Maytag Dryer Error Codes
F3E1
After disconnecting the dryer from the mains, check the wiring of the exhaust thermistor. Any disconnected cables must be reconnected. If the wiring harness is damaged, it must be replaced. Check the resistance of the outlet thermistor. At normal temperature, it should be about 10,000 ohms. If the thermistor is broken, replace it. Replace the electronic control board if the wiring and exhaust thermistor is in excellent shape. Request Service
F3E2
Look for metal objects that may have shorted the two metal bars of the dryer’s moisture sensor. With the dryer unplugged, inspect the moisture sensor wiring harness. Make sure that all bare wires are connected. Replace the moisture sensor wiring harness if it is damaged. Request Service
F3E3
After disconnecting the dryer from the mains, check the inlet thermistor wires. Any disconnected cables must be reconnected. If the wiring harness is damaged, it must be replaced. Check the resistance of the inlet thermistor. At normal temperature, it should be about 50,000 ohms. If the thermistor is broken, replace it. Replace the electronic control board if the wiring and inlet thermistor are in excellent shape. Request Service
F4E1, F4E2
After unplugging the dryer, check the wiring harness connections to the heater relay and the heating element on the electronic control board. Any disconnected cables need to be reconnected. The wiring harness has to be replaced if it is damaged. Call a professional to replace the electronic control board if the wiring is sound. Request Service
F4E3
Clean the lint screen by removing it. Inspect the flexible vent line behind the dryer for kinks or obstructions. Check if the damper vent outside of your home is operating properly. Request Service
F1E3
This problem manifests if the incorrect electronic control board is inserted. The appropriate electronic control board for your dryer model should be ordered and installed. Request Service
F2E1
The source of this code is a stuck button on the user interface control panel. If the stuck key does not move, replace the user interface control panel. Request Service
F2E4, F2E5
There is an internal problem with the user interface. It has to be replaced. Request Service
01
Clean the exhaust duct system and lint filter. If the exhaust vent system is clear, replace the thermocouple. Request Service
02
After disconnecting the dryer from the mains, inspect the heating system components. To find out if the electric dryer circuit breaker has tripped, check the circuit breakers. Make sure that the gas shut-off valve of the gas dryer is fully open. Request Service
03
Unplug the dryer, then lift the top panel to expose the door switch. All disconnected cables must be reconnected. If the door switch wiring harness is damaged, it should be replaced. Request Service
WHY CHOOSE SUPERIOR APPLIANCE SERVICE
Over 400 positive reviews on Google Maps and HomeStars.
Repair on the same day or any other date convenient for you.
All work and parts guaranteed for your peace of mind.
Adequate prices. 9 out of 10 problems are solved after the first call. No overpayments.
Want to know if you need a handyman to solve your problem?
Leave your phone number and our dispatcher will call you back right away!
Thank you.
We will contact you. Shortly.