AEG Washer Error Codes
- Licensed Technicians
- ODP Certified
- 24-hour telephone support
- 5 star reviews
AEG Washing Machine Error Codes
EF0
After cleaning the filter, replace it. The filter is located at the bottom of the front panel of the washing machine. It is also possible that you have used too much detergent and too much foam has formed in the machine. With an empty drum and no detergent, start the wash cycle at 60°C. Request Service
EH0
After unplugging the washing machine, wait 30 seconds. Reconnect the power cord after that. Try to start the washing machine, select a program and turn it on.
E10, C1, F1
If the water supply is turned on and the hose pipe is not kinked, the issue could be the result of a broken inlet valve. Establish continuity at the inlet valve using a multimeter; it should be between 2000 and 4000 Ohms.
E11
Make sure that the water supply is turned on. If the error persists, contact a specialist. Request Service
E20, E21, E22
Open the lower right cover on the front panel of the washing machine. Remove the filter and clean it. Replace the filter. Check that the drain tube is not kinked.
E30, C3
Disconnect the plugs from the water supply and the washing machine mains. Keep the washing machine tilted slightly backward for 40 seconds. Reconnect the washing machine after you have lowered it to the ground.
E40, E41, E42
Press the door until you hear a click to start the washing cycle. In the worst instance, a technician will need to repair the door lock if it has been broken. Request Service
WHY CHOOSE SUPERIOR APPLIANCE SERVICE
Over 400 positive reviews on Google Maps and HomeStars.
Repair on the same day or any other date convenient for you.
All work and parts guaranteed for your peace of mind.
Adequate prices. 9 out of 10 problems are solved after the first call. No overpayments.
Want to know if you need a handyman to solve your problem?
Leave your phone number and our dispatcher will call you back right away!
Thank you.
We will contact you. Shortly.